About this 3D model

Boden Tube Guide (v1) I have designed a boden guide to allow filament rolls to be hung above my machine allowing the filament to be fed smoothly to the rear of my P1S printer. I found the best orientation to print is shown in image 3. Machine Configuration - Printer: BambuLab P1S Plate: Textured PEI Plate Hot end: 0.4mm hardened steel nozzle Filament: Bambu Labs Matte PLA My Process settings for this print 0.20mm Standard - Default with the below changes - Strength- Wall Loops - 4 Detect Thin Walls - Checked Sparse Infill Density - 44% Support- Enable Support - Checked Type - Normal(auto) Others- Brim type - No-brim Bolts and Nuts - 6x M2.5 x 6mm x 0.45p Metric Coarse Stainless A4-70 G316 Socket (T8) https://www.boltandnut.com.au/machine-screws/cap-head/m2-5-x-0-45p-metric-coarse-stainless-a4-70-g316-socket-t8-machine-screws-iso-14579 6x M2.5 x 0.45p Metric Coarse Stainless A4-70 G316 Hex Nyloc Nuts https://www.boltandnut.com.au/m2-5-x-0-45p-metric-coarse-g316-stainless-hex-nyloc-nuts 2x M3 x 10mm x 0.50p Metric Coarse Stainless A2-70 G304 Cap Torx (T10) Machine Screws https://www.boltandnut.com.au/machine-screws/cap-head/m3-x-0-50p-coarse-stainless-a2-70-g304-cap-torx-t10-machine-screws-iso-14579 Other Hardware 2x LEOWAY PC4-M10 Male Straight Pneumatic PTFE Tube Push in Quick Fitting Connector for E3D-V6 Long-Distance Bowden Extruder 3D Printer (Pack of 10pcs) https://www.amazon.com.au/dp/B07HMDR2PD?psc=1&ref=ppx_yo2ov_dt_b_product_details