About this 3D model

Hi All! This is a dice box I've been working on for a while. It's a display tray for your dice, a carrying case and a dice tray when needed! Post printing needs only a few magnets for the cover and, optionally, felt for the inner tray if you desire. Inner tray you ask? Yes! As a case it can carry a set of average dice well enough (D4 to D20 and a percent die) and when ready the inner dice holder may be removed so you can use the base as a dice rolling tray! The clearances were designed with FDM printing in mind for the print, however SLA would work fine, just expect a bit more clearance. Note: Pictures may be of a slightly older model, but is representative of the style. Other than that, it's a well designed lil dice pyramid! Pointy! Note: Additional Material: 8 X 3 mm magenets (with glue) https://amzn.to/2HJaKTh Optional: Felt of your choice (~1.5mm thick) https://amzn.to/3fKiRM2 Optional: Foam of your choice (~2mm thick) https://amzn.to/36g4hsu I've provided links to items I've used above (Note: They are in bulk!), these are affiliate links and you do not have to go get the items through them, it is appreciated if you decide to though!