About this 3D model

The K-Team HIVE ProBox Organizer is fully compatible with the Sci-Fi Skirmish Game version HIVE. It's combines a foldable dice tray and a compact organizer for your gaming accessories. The box has a dimension of 192 x 162 x 53 mm and this size is almost doubled when activating the dice-tray mode :) It's recommened to glue an appropriate felt or similar on the inner surface so you can roll your dice as a pro. The organizer offers space for all token, templates, dice and cards of the HIVE box and some extras as a dedicate place for your laserpointer and some other biz & tools. Content & description ProBox_body_top: upper part of the box, it's recommenend to glue a felt on the surface ProBox_body_bottom: lower part of the box, it's recommenend to glue a felt on the surface ProBox_body_top_diceplate: top body part but with a printable diceplate ProBox_body_bottom_diceplate: lower body part but with a printable diceplate ProBox_diceplate: separate diceplate for the top or bottom part of the ProBox if you want to print it with another material (e.g. TPU) ProBox_hinge_onepiece_wide tolerance: set of hinges as one printable part with a wider tolerance (you need to cut the hinges with a knife in order to break the inner contacts) ProBox_hinge_onepiece_tight tolerance: set of hinges as one printable part with the standard tolerance (you need to cut the hinges with a knife in order to break the inner contacts) ProBox_hinge_multipart: set of hinges as a multipart if you have issues with the tolerances of the standard hinges. You need to glue the hinge part locker with a little bit of superglue ProBox_slidingclosure: set of sliding closure and now without the brand / website on the surface for design reasons KTeam_ProBox_insert_HIVE_organizer: organizer insert for the ProBox KTeam_ProBox_insert_HIVE_biz: first box for the organizer insert KTeam_ProBox_insert_HIVE_token: second box for the organizer insert Assembly https://www.youtube.com/watch?v=WKvaHR6r5nY Superglue Opt. felt for dice rolling (173 x 140mm) It's recommened to use some sort of felt for the inner side of the ProBox for a smooth dice rolling. First step: Glue the felt on the inner sides. As an alternative, there are .stl files available of a ProBox with an in-built roughened inner surfaces and also extra plates that you can print with another material (e.g. TPU) and glue it on the surface. Second step: Glue the hinges (normal and loose, depending on printing tolerances) to the sides by using some superglue. Note: Here I'm using two sheets of self-adhesive felts but you can also use any other felt or material. Or just print the box in a version with a roughened surface without the need of any material to use.