About this 3D model

The ProBoxXL is the bigger version of the ProBox and combines a foldable dice tray and a compact organizer for your gaming accessories. The box has a dimension of 260 x 162 x 53 mm (folded) and this size is almost doubled when activating the dice-tray mode :) It's recommened to glue an appropriate felt or similar on the inner surface so you can roll your dice as a pro. The organizer offers space for your tape measure, token, templates, dice and cards, laserpointer and some other biz & tools. This is the standard ProBoxXL. It contains 2 different generic inserts for the ProBoxXL. All ProBoxXL inserts are interchangeable if you want to upgrade later on. Dimension (xyz): 260 x 162 x 53 mm (folded) Content & description ProBoxXL ProBoxXL_body_top: upper part of the box, it's recommenend to glue a felt on the surfaceProBoxXL_body_bottom: lower part of the box, it's recommenend to glue a felt on the surfaceProBoxXL_body_top_diceplate: top body part but with the diceplate includedProBoxXL_body_bottom_diceplate: lower body part but with the diceplate includedProBoxXL_diceplate: separate diceplate for the top and bottom part of the ProBoxXL if you want to print it with another material (e.g. TPU) or colorProBoxXL_hinge_multipart: set of hinges as a strong multipart version. You need to glue the hinge part locker with a little bit of superglueProBoxXL_slidingclosure: set of sliding closure ProBoxXL_Organizer_generic_4in1: Organizer with inner storage sizes 162x109mm / 162x34mm / 89x67mm / 54x67mmProBoxXL_Organizer_generic_3in1: Organizer with inner storage sizes 231x72mm / 136x72mm / 94x72mm ProBoxXL Video of the ProBox (similar to the ProBoxXL)youtube.com/watch?v=WKvaHR6r5nY Note: In the video, I'm using two sheets of self-adhesive felts but you can also use any other felt or material. Or just print the box in a version with a roughened surface without the need of any material to use. Superglue Opt. felt for dice rolling (238 x 140mm) It's recommened to use some sort of felt for the inner side of the ProBoxXL for a smooth dice rolling. So this is the first step: Glue the felt on the inner sides. As an alternative, you can print the "diceplate" versions of the ProBoxXL with an in-built roughened inner surfaces or just print 2 diceplates (e.g. with TPU) and glue it on the surface. As a second step you would need to prepare the hinges and glue it to the sides of the ProBoxXL