About this 3D model

The Shatterwars ProBox Organizer is a all-in-one transport box, organizer and foldable dice tray and compatible with the tabletop game Shatterpoint. Dimension (xyz): 192 x 162 x 53 mm The original ProBox is a dice tray and a practical storage and dice box for your tabletop gaming accessories. The box has a dimension of 192 x 162 x 53 mm and this size is almost doubled when activating the dice-tray mode :) It's recommened to glue an appropriate felt or similar on the inner surface so you can roll your dice as a PRO. The organizer offers space for all your token, markers, dice and cards you need for your game. The organizer comes in two versions: Organizer (as in pictures) Organizer with removable token boxes Content & description ProBox_body_top: upper part of the box, it's recommenend to glue a felt on the surface ProBox_body_bottom: lower part of the box, it's recommenend to glue a felt on the surface ProBox_body_top_diceplate: top body part but with a printable diceplate ProBox_body_bottom_diceplate: lower body part but with a printable diceplate ProBox_diceplate: separate diceplate for the top or bottom part of the ProBox if you want to print it with another material (e.g. TPU) ProBox_hinge_onepiece_wide tolerance: set of hinges as one printable part with a wider tolerance (you need to cut the hinges with a knife in order to break the inner contacts) ProBox_hinge_onepiece_tight tolerance: set of hinges as one printable part with the standard tolerance (you need to cut the hinges with a knife in order to break the inner contacts) ProBox_hinge_multipart: set of hinges as a multipart if you have issues with the tolerances of the standard hinges. You need to glue the hinge part locker with a little bit of superglue ProBox_slidingclosure: set of sliding closure and now without the brand / website on the surface for design reasons Shatterwars_ProBox_Insert_Organizer: organizer insert for the ProBox Shatterwars_ProBox_Insert_Organizer_removable_1: organizer insert for the ProBox with removable token boxes Shatterwars_ProBox_Insert_Organizer_removable_2: organizer insert for the ProBox with removable token boxes Shatterwars_ProBox_Insert_Organizer_removable_3: organizer insert for the ProBox with removable token boxes Shatterwars_ProBox_Insert_Box_1: first box for the organizer insert Shatterwars_ProBox_Insert_Box_2: second box for the organizer insert Shatterwars_ProBox_Insert_Box_3: third box for the organizer insert Assembly https://www.youtube.com/watch?v=WKvaHR6r5nY Superglue Opt. felt for dice rolling (173 x 140mm) It's recommened to use some sort of felt for the inner side of the ProBox for a smooth dice rolling. So this is the first step: Glue the felt on the inner sides. As an alternative, there are .stl files available of a ProBox with an in-built roughened inner surfaces and also extra plates that you can print with another material (e.g. TPU) and glue it on the surface. As a second step you would need to glue the hinge to the sides by using some superglue. Note: In the video, I'm using two sheets of self-adhesive felts but you can also use any other felt or material. Or just print the box in a version with a roughened surface without the need of any material to use.