About this 3D model

With these files you can print a whole unit of Late Medieval Late 15th Cetury (around 1450-1500) Swiss-German-Frontrankers in Marching Poses. As Front-Rankers the miniatures wear full upper plate armor with front-back-plates, helmets and some arm-protection. The miniature-Files are all MULTI-PART and interchangeable with each other and wit the files of January '26. You can also use all our heads and polearms from September '25 onwards on them. The unit is composed out of 3 + 1 base-sculpts with 16 heads that create easily over 100 different miniatures for a units, made up out of heads, 3 upper & lower torsos, 5 pole-arms or just the pole-arm-toppers. This set shares its heads & polearms-bits with the March '26 Marching Front-Rankers in Jackets-Set. We recommend printing the miniature at 104,5% if you want them at 30mm instead of the original 28mm, rescaling should work without a problem on the supports. The miniatures have a high level of details and are historically accurate researched from actual artworks and surviving museum pieces, that have been deemed original. They can easily be scaled up to 54mm detail-wise, however we recommend creating your own supports for that. They come pre-supported with lychee in .lys-files, .stl-files and without supports as .stl.-files. They are intended to work together with prominent 28mm-brands of the late Medieval period and can be interchanged with them too to a degree. The files come split in the following way: Marching Front-Rankers in Full upper Plate Armor: 3 upper bodies in full plate8 lower torsos: complimentary to the above, 2 with tassets and either with or without puddlesHeads & Pole-Arms: 16 heads:4 early 'deep' Sallets from 1450s-1460s (2 with scarf-hat, 2 with crests & without) 4 Swiss-German Iron-Hats (" ") 4 Type 1 Skull-Caps with Rondells (" ") 4 Type 2 Skull-Caps with Rondells (" ")