About this 3D model

The Versatile Dial-A-Sign: a highly customizable sign holder Make your own unique signage easily with Bambu Lab's Make My Sign. Use different pointers to suit the display . I've included 3 but you're welcome to model your own. Print the parts in the color scheme you need . With an AMS, the signs can be multi-colored, or color the sign with markers. Assembly Remove the supports from the printed Dial-A-Sign base. To insert the slider, press down on the slider frame at the mid-section , insert the slider bottom first and it'll pop into place. Insert the pointer you wish to use, pop in the sign, and you're good to go. Bambu Lab Make-My-Sign Web Tool Sample signs I'd created can be found here: https://makerworld.com/en/models/79649#profileId-84279 To make your own signs using Bambu Lab's Make My Sign web tool, go here: https://makerworld.com/en/makerlab/makeMySign The sign should be 150mm wide. I suggest a height of 80mm to start with. Keep the bottom 40mm of the sign blank. Have fun with this, and a like or follow will be most appreciated! ___