About this 3D model

This is a simple wall mount for a Reolink security camera (type E1, E1 Pro and E1 Zoom) The adapter plate listed below or the original adapter that came with the camera is required. The adapter can be mounted so that the power cable is routed either left or right at the back of the holder. The holder can be mounted so that the camera sits on it or hangs down. I printed the holder from Bambu Lab PLA, for outdoor use I would recommend ASA or ABS. Attachment I attached the wall mount with 2 chipboard screws 3.5x30. For attaching the adapter plate, 2 countersunk screws DIN 965 M3x8 are required. Adapter plate for camera attachment: https://makerworld.com/de/models/80904#profileId-86062