About this 3D model

HueForge design inspired by the 404 error message shown on Tesla website. Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Charcoal At layer #4 (0.56mm) swap to Red At layer #8 (1.04mm) swap to Silver At layer #12 (1.52mm) swap to Jade White for the rest. If you enjoy my models, please consider supporting me and my future designs! https://www.buymeacoffee.com/keylinestudio