About this 3D model

Christmas Puzzle Gift Box V2 Features: A locked lid A hidden key and locking system Super strong lock (Box will not open without removing the bolt or breaking it) Print in multiple colours without AMS Fun for kids Secret storage Reusable This Christmas puzzle box is a great addition to anyone's Christmas day! Fill it with sweets or gifts and give your kids the challenge of figuring out how to open the lid! You need to print the following parts for a full puzzle box: Box Lid Side ribbon strip x 4 Top ribbon strips Key Bolt Bolt Cap Key Cap All parts are easy to print and fit together easily with generous tolerances. Assembly: Tilt the box on it's side Gently slide a side ribbon strip into the track. Keep sliding until it meets the stop. Repeat this on all 4 sides. Put the lid on Locate the bolt through the hole in the box and into the threads in the lid. (Start by hand) Turn the bolt all the way in with the key Cover the bolt with the bolt cap Put the key into it's secret compartment Cover the key with the key cap. Usage: Take off the caps (Key cap is deliberately tricky - Bolt cap can be popped out by squeezing the box) Tap the box on your hand or a hard surface to release the key (if it hasn't already fallen out) Use the key to unscrew the bolt enough to get a grip with your fingers. Remove the bolt entirely and place to one side. Open the lid! Print Settings: Nozzle: 0.4mm Infill: 12% Gyroid Layer Height: 0.2mm Support: None Perimeters: 5 Top/bottom Layers: 5 This will make everything pretty solid with minimal infill being used. Tip: If you find that the side ribbon strips are tight, then print them at 0.12 layer height. This should give a little more tolerance between the sliding parts. Thanks for looking! Please don't forget to post pictures of your makes :) EDIT Extreme Edition Now Available With Even More Secrets! https://makerworld.com/en/models/97277#profileId-103821