About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic BambuLab Green Transmission Distance: 8 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 Swap Instructions: Start with Charcoal Black At layer #9 (0.8mm) swap to BambuLab Green At layer #13 (1.12mm) swap to Lemon Yellow for the rest.