About this 3D model

this a hue forge printed lithophane, that is in a LED Lightbox. I did a 5mm border around the lighophane so it would fit in the lightbox I designed for it. I used 4 colors for the graphic and then the box and back is printed in Sunlu Black. I added the lithophone as a seperate print profile as that is how I used the 5 colors. I did use a brim on the inside and outside of the frame to keep it stuck to the plate. might not be needed but that is how I did it. for the lithophane print. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu White Transmission Distance: 5 PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Blue Transmission Distance: 2.8 Swap Instructions: Start with White At layer #8 (0.72mm) swap to Silver At layer #10 (0.88mm) swap to Red At layer #15 (1.28mm) swap to Blue for the rest.