About this 3D model

A simple set of spacers which, when installed, raises the Z axis homing height on the Anycubic Photon Mono. This is particularly useful if installing a magnetic build plate as I found the Sovol plate made Z axis adjustment impossible. I have included 1 mm, 2 mm and 2.6 mm spacers although I used the 2 mm on my Mono which was more than enough to allow adjustment. The distance between the screw holes is 8 mm so these may be useful for other printers. If you need a different height just use the 1 mm file and scale the Z axis in your slicer of choice.