About this 3D model

Winter's Night With You Print Time 4hrs 21 min P1P/ Bambu Basic PLA in CMYK Colours (Total of 4 colors used) THIS IS NOT SET UP TO CREATE WITHOUT AN AMS but i am sure it is posssible I use Other filmament but Bambu Basic PLA Profile (Sunlu PLA+ white, Bambu PLA Magenta, Sunlu PLA+ yellow and Sunlu PLA+ light blue) Aux fan is OFF (if using one) Settings are taken from https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions%20 Lithophane created with https://lithophanemaker.com/Color%20Lithophane.html?fbclid=IwAR0zbiYVOGT2kV0MY4LtLbNk5rrg_wOd_bEsA2kpnxebZCTbBNzPyFu8h7g.#processing First Layer .1mm Other layers .15mm Classic walls 2 wall loops 3 top shell 3 bottom shell 100% rectilinear Speed: Slow Down For Overhangs is Turned off Prime tower enabled Brim/Bed Adhesioin: None Needed Flushing set for .65 (you will need to adjust this for your filaments and machine type)