About this 3D model

A C. Griswold's Miracle (NL's Christmas Vacay Reference)- I am a total Griswold family fan and have been my entire life. This was his hallelujah moment when it came to setting up the outside lights much like my creating this small token light in remembrance of a very funny movie Print Time 5 hrs 1 min P1P/ Bambu Basic PLA in CMYK Colours (Total of 4 colors used) THIS IS NOT SET UP TO CREATE WITHOUT AN AMS but i am sure it is possible I use Other filament but Bambu Basic PLA Profile (Sunlu PLA+ white, Bambu PLA Magenta, Sunlu PLA+ yellow and Sunlu PLA+ light blue) Aux fan is OFF (if using one) Settings are taken from https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions%20 Lithophane created with https://lithophanemaker.com/Color%20Lithophane.html?fbclid=IwAR0zbiYVOGT2kV0MY4LtLbNk5rrg_wOd_bEsA2kpnxebZCTbBNzPyFu8h7g.#processing First Layer .1mm Other layers .15mm Classic walls 2 wall loops 3 top shell 3 bottom shell 100% rectilinear Speed: Slow Down For Overhangs is Turned off Prime tower enabled Brim/Bed Adhesion: None Needed Flushing set for .55 (you will need to adjust this for your filaments and machine type)