About this 3D model

A1 AMS 4-Way Splitter Kit This kit allows you to use the A1 AMS Hub as a 4-way splitter. I've printed a few splitters and this one is silky smooth and is a complete kit. NOTE: There are two versions of the Mounting Bracket. One is straight and the other is angled. I tested hundreds of prints with both and never had any feeding or pull back issues with either. I'm providing both in case you have a preference. Features & Benefits Silky Smooth Complete Print Kit Proven Bambu Lab A1 AMS Hub Mounting Slot Allows Flexible Height & Angle Easily Removed With The Button Release Kit Includes Adapter for A1 AMS hub Mounting bracket for the Adapter PTFE Coupler Release Button Installation Install the PTFE Coupler Button first ( click here for instructions ) Remove the outer most screw to the right of the chamber filament tube Using a screw install the Adapter Mounting Bracket. The Spool Arm Screw, or equivalent, will work. Install the A1 AMS Hub. You'll need to remove the magnet tab with cutters. Then align the tabs of the A1 AMS Hub with the Adapter and insert and twist. Insert the Adapter/Hub assembly into the Mounting Bracket and then into the PTFE Coupler. Make sure it is fully seated in the PTFE Coupler. Insert desired PTFE tubes into the A1 AMS Hub