About this 3D model

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05/07/2026 : A version for P2S / X2D is available. https://makerworld.com/it/models/2753423 05/16/2026 : Added print profile with better threaded pins. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Boost Me If you found this project helpful, please consider giving it a boost. Thanks! ^_^ I needed a lateral spool holder and at the same time a splitter to use the single coil more easily. This REMIX was necessary! 2 birds with one stone! '^_^ The remix consists of the union of these 2 splendid components (thanks to ryan.fransen and ultrajaxel ), and the addition of the Bambu Lab logo to the HUB. I also created a negative part so that it all coupled with my PTFE support that I had already installed (a photo to illustrate the "green" component): Slightly modified in shape, but the slim version works equally well: https://makerworld.com/en/models/83098#profileId-88643 - - - - - - - Spool Holder: The spindle which holds the AMS Spool holder is nice as it incorporates a nice click mechanism to hold it on as well as it incorporates the auto rewind spring mechanism of the AMS spool holders. This works very well. This is the one you need - ensure you get the Green one: https://eu.store.bambulab.com/en-it/collections/spare-parts-for-ams-lite/products/ams-lite-rotary-spool-holder This design uses a PC4-M10 fitting for the filament. This is what I bought: Amazon.com Link: https://a.co/d/cPCs098 Hub: BambuLab now sells their 4-in-1 PTFE Adapter which serves the exact purpose of this mod. WARNING: Be careful to purchase the correct HUB (there are 2 similar ones). Here is the link to the Global store: https://store.bambulab.com/products/ams-lite-filament-hub?_pos=5&_sid=8442e857c&_ss=r Just depress the black end of the PTFE tube coupler and slide it into the model and the AMS hub LITE. The model will keep the black end depressed, which is essential to stop the PTFE teeth from interfering with filament input. For assembly 4 screws required: - 2x M3x25mm (top) - 2x M3x13mm (bottom) So Happy with these add-ons!!