About this 3D model

I made my own case to assemble the Stratux kit.The idea is to keep the antennas in place, but occupying the smallest area. I'm using 1 fan (30x30x7mm), it came with several screws and nuts and I'm using 10 screws and 8 nuts.4 screws and 4 nuts to hold the fan. I'm actually using 3 because the 4th would hit the AHRS module, but I uploaded a new version with this problem fixed.2 screws and 2 nuts to hold the Raspberry Pi in place (check the pictures)The other 4 screws and 2 nuts are used to put the 2 parts together. Besides that you will need all the parts required to build the Stratux, plus the suction cup holder (you might use a different king, but maybe you need to make some adjustments)And finally, if you want to print the GPS shield (it's optional), you will need some copper tape to cover it. ===== If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal