About this 3D model

EN Simply another filament shelf holder. Print two holders per shelf unit and mount them on a sturdy wall. Then simply slide two round rods (21 or 24 diameter) through the holes. If other diameters for the feedthroughs are desired, leave me a like and a comment and I'll upload more versions! Printed in PLA for better stability, but probably works well in PETG with the settings (please test yourself and always consider the weight to be carried). Printed with the following settings on a BL P1S in highest speed: Layer height 0.28mm Walls: 3 Filling: 25% (honeycomb) Support: No Brim: 4mm ---- If you like my model, please leave me a like! And a picture of your Make would be great for others to see how it works. ---- Update: If you need a different distance between the storage bars for other coil sizes, write me a comment and I will adjust the STL. DE Simply another filament shelf holder. Print two holders per shelf unit and mount them on a sturdy wall. Then simply slide two round rods (21/24mm diameter) through the holes If other diameters for the feedthroughs are desired, leave me a like and a comment and I'll upload more versions! Printed in PLA for better stability, but probably works well in PETG with the settings (please test yourself and always consider the weight to be carried) Printed with the following settings on a BL P1S in highest speed: Layer height 0.28mm Walls: 3 Filling: 25% (honeycomb) Support: No Brim: 4mm ---- If you like my model, please leave me a like! And a picture of your Make would be great for others to see how it works. ---- Update: If you need a different distance between the storage bars for other coil sizes, write me a comment and I will adjust the STL.