About this 3D model

Optimized for 3D printing with a amazing depth of field. The Glowing series is optimized for use with glow in the dark filaments for a mesmerizing effect. Charge the pictures with UV light for the most optimal effect. There will be 2 print profiles available. 200x200 is optimized for x1c, p1s, p1p 150x150 is optimized for A1 mini. Frames for both sizes can be found in my uploaded models. Pictures can be printed with out AMS by following the print instructions below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Bambu Lab PLA Matte Charcoal Bambu Lab PLA Glow Pink Bambu Lab PLA Glow Orange Bambu Lab PLA Glow Green Bambu Lab PLA Glow Blue Bambu Lab PLA Glow Yellow Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Bambu Lab PLA Glow Pink At layer #8 (0.72mm) swap to Bambu Lab PLA Glow Orange At layer #17 (1.44mm) swap to Bambu Lab PLA Glow Green At layer #21 (1.76mm) swap to Bambu Lab PLA Glow Blue At layer #23 (1.92mm) swap to Bambu Lab PLA Glow Yellow for the rest. Art generated with midjourney and optimized for 3D printing with Hueforge.