About this 3D model

General Info 3x M4 (countersunk) holes on each hinge side No supports needed 20.50mm on each side of the hinge Models / Clearance 0.50MM_Print In Place Hinge.stl Default is 0.50mm gap (should work on just about any printer). 0.25MM_Print In Place Hinge.stl This has half the offset facing and hinge spacing as the 0.50mm model. The slicing image below is an example comparing 0.25MM v 0.50MM gap for visualization To Adjust Clearance (In Fusion 360) Open the .f3d file Open/Edit Hinge Geometry Sketch Edit the constraint (0.25mm in the example graphic below) Edit the face offsets (2) in the parametric timeline from 0.50m to 0.25mm (or other value) Export everything as Mesh (stl) and print it