About this 3D model

Magnetic 100 Gram Silica Packet Container (For Dry Filament Box) I didn't have room at the bottom of my filament spool / dry box (SAMLA Based) for more silica packets, but there was plenty of space above the spools in the box. So I created this. Uses 8x 12x3mm magnets (EXAMPLE: https://www.amazon.com/dp/B09XVBL8SK ) Press fit but glue if necessary Make sure to maintain the correct polarity on all 4 sets of magnets Uses rechargeable 100 Gram (or smaller) Silica packets (EXAMPLE: https://www.amazon.com/gp/product/B0BDRCR4SP) For 100 Gram, the tight is fit, just position them in the box and shake until it falls into place. It will come out easily when recharge time comes up. No supports Print in the orientation in the example pictures If your dry box is also a heated box, print with PETG/ASA or other high temp filament.