About this 3D model

This 3D-printable filament roller is designed to enhance the filament feeding process, ensuring a smooth and tangle-free experience. The assembly consists of three printed parts: two base and four rollers and two clips, along with four ball bearings, each with a 8mm inner diameter and a 22mm outer diameter. This design is tailored for direct use within Ikea Samla boxes or other dry storage containers. Materials Needed: 3D-printed base (2) 3D-printed rollers (4) 3D-printed clip (2) Ball bearings with 8mm inner diameter and 22mm outer diameter (4) Assembly Steps: Print the Parts: 3D print the 2 base parts and the clip and 4 rollers using your preferred filament and print settings. Ensure a sturdy and precise print for optimal performance. Prepare the Bearings: Insert the four ball bearings into the designated spaces on the rollers. Make sure they are securely seated. Attach Rollers to the Base: Place each roller onto the base, aligning the bearing slots. Ensure the rollers rotate freely around their axes. Install in Storage Container: Place the assembled filament roller into your Ikea Samla box or other dry storage container. The compact design allows for easy integration. Secure Lid (Optional): If applicable, secure the lid of your storage container to maintain a controlled and dry environment for your filament. Enjoy Tangle-Free Filament Feeding: With the filament roller in place, enjoy a hassle-free filament feeding experience, especially in dry storage conditions, extending the life of your 3D printing materials. Enjoy!