About this 3D model

This is a modified parts set to reduce print time and finishing time after print for the following design.https://www.myminifactory.com/object/3d-print-jet-engine-component-planetary-gear-75171 Major parts (listed below) are separated to two-parts to eliminated the my special support.A. Affected parts (1) Gear10-Carrier01ws → Gear10-Carrier101 and Gear10-Carrier102 (2) Gear-Box-Rear01ws → Gear-Box-Rear101 and Gear-Box-Rear102ws (3) Gear-Ring-Sft01ws → Gear-Ring-Sft101 and Gear-Ring-Sft102 New parts are assembled by screws (M1.4x3.5L), and glued if you want. B: Download files includes; -files: STL Files (6 items) STL file name: "ws" of last 2 digits means "With Support" which special designed. C: Purchase Parts Information; Additional Screws (M1.4x3.5L) 13ea D. Assembly Points - Standard Skill (such as Drilling, Tapping, Filing, Tightening, Painting and Gluing etc.) is needed. E. Total Net Print Time: Approx. 11 Hr (Origina parts=18 Hr) - (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support) Note: When at actual print, each parameter may be adjusted by your experience. F. 3D printing settings Raft, Support, Layer Height, Infill: Depending on your experience. My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA. I do hope you enjoy making!!