About this 3D model

This is my first self-designed object. Please be patient with me if there are any mistakes. :) As my hands don't function so well (due to limited muscle strength), I find the original holder difficult to use because it is too high for me. I had already printed and mounted the wall bracket from cwills75 . https://makerworld.com/de/models/48945#profileId-50873 The printed model is still from the first draft, so the curves are quite angular. This has already been adjusted in the print files. Even without gluing the two parts together, the AMS lite is already considerably more stable. Let's see how it performs in practice and what adjustments will be necessary. I would be very grateful for any suggestions and feedback. Greetings McRolly ------------------------------------------------------------------------------------------------------- This is my first self-constructed object. So bear with me in case of mistakes. :) Since my hands don't work so well (due to low muscle strength), I don't get on so well with the original holder as it's too high for me. I had already printed and mounted the wall mount from cwills75 . https://makerworld.com/de/models/48945#profileId-50873 The printed model is still from the first draft, so the curves are still quite angular. This has already been adjusted in the print files. Even without gluing the two parts together, the AMS lite is already much more stable. Let's see how it behaves in practice and what adjustments will be necessary. I would be very grateful for any suggestions and tips. Regards McRolly