About this 3D model

1 year, 10 months, 3 weeks, 3 days (or 694 days) after installing the Vertical X Carriage on my Tevo Tarantula I present you the **new Vertical X Carriage v2.0)** After all that time, printing daily, the carriage printed in PLA to be just a prototype, showed some signs that it was giving up. I redesigned it and added some modifications, improvements and reinforced here and there. It's the same concept, for the same purpose, but much better! ===== * Requires few hardware and most of them comes with the printer* Works with radial fang mount **List of hardware:*** 3 v solid wheels (they come with printer)* 3 M5 x 30mm bolts (they come with printer). One bolt must be no longer than 30mm or it will hit the BLTouch (or just print a spacer or use any spacer or washer you have handy), the other 2 might be longer if you want.* 3 M5 nuts (they come with printer)* 2 nylon spacers (they come with printer)* 2 M4 nuts. You can use the t-nuts* 2 M4 x 12mm at least. It's OK to use longer, but do not use shorter.* M5 Washers for fine alignment might be helpful (they come with printer) ===== **Assembling tips:*** First assemble the bottom wheel, here is the sequence: M5 x 30mm bolt, 2 washers, v solid wheel, eccentric nut, main body, washer (optional) and M5 nut.* Second assemble the endstop and BLTouch, if you are using one.* Now assemble the rest as you prefer.- I assembled everything to the main body, by last I inserted the 2 top wheels, holding the carriage in place and finally the belt bracket.* Sequence of the 2 top wheels: M5 x 30mm bolt (or longer), v solid wheels, washer, nylon spacer, main body, M5 nut. ===== If you'd like to support me you can post a make, comment and/or pay me a coffee at [PayPal](paypal.me/paulorfo)