About this 3D model

Print at 100% infill with a layer height of 0.013mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 4 Swap Instructions: ( all filaments are from Bambu) Start with Black At layer #6 (0.56mm) swap to Dark Red At layer # 7 (0.56mm) swap to Yellow tough At layer #9 (0.8mm) swap to Jade White for the rest.