About this 3D model

Purpose The Maglula “UpLULA” loader is designed to accommodate a wide range of magazines, which means its opening is a bit too loose for a fair portion of common magazines. These printable inserts allow you to ease loading your specific magazine, especially single stacks. Variants Metal 9mm Double Stack Typical examples: Sig Sauer P226/229, P320; Beretta 92FS; MP shield; Polymer 9mm Double Stack Mostly Glocks: G34/17/19/26, and other double stacks Metal 45ACP Single Stack All the lovely 1911 and 2011s. MagLULA's official version of this can be found here , and mine serves the same purpose. *For many manufacturers, their 9MM DS magazine shares the exact dimensions as the 38ACP and 40SW caliber variants; however a fit is not guaranteed so please try them yourself. Design Features Chamfered opening to ease insertion Friction fit to UpLula, no glue or screws needed Unbossed text inside to identify matching magazine types Fast print time (45min on my printer) Recommended Print Parameters More than 4 wall loops, 4 bottom layers, and 4 top layers Infill >15% No Support needed Brim suggested if bed adhesin is not very strong Depending on the dimensional accuracy of your 3D printer, you may need to adjust XY expansion/shrinking a little to get a snug fit .