About this 3D model

This is a huge modular terrain set for building bridges and wooden walkways! This set started as a 5-piece modular set to make a wooden bridge, but our members loved it so much we expanded it into a 12-piece modular set that can be used to make everything from wooden bridges, to piers, to a winding wooden walkway through a flooded area or swamp! On top of the existing 5-piece set, we have now added another 7 parts, using some of your suggested ideas along with some ways we thought up to expand it further! The first thing we added was a piece that had connectors on each side, so a X shaped joining piece. This means the bridge can now be expanded further in every direction, so you can use it not only as a bridge but as a raised walkway for areas such as swamps. We also added end cap planks along with this so that you can easily end any path without showing the connector pegs. We also added a section with a wooden roof over it to add some nice variety to the terrain set. You guys suggested using it as a pier, so we did just that, making a long pier section with ropes tied up and piled up ready for boats and ships. We also added some more detailed sections, such as a long broken section where the planks have collapsed, and a section with barrels. The simple peg-and-hole connector system makes setup quick and solid, so you can drop in new configurations whenever needed. WHOLE SET NOW INCLUDES: -Middle Section (Plain)-Middle Section (With lantern)-End (with Stairs - Left Side)-End (with Stairs - Right Side)-End (Ruined)-Wooden Pier-Covered Long Walkway-Collapsed Long Section-Cross Connector Section-Middle Section (With Barrels)-End Connector Planks (Male and Female) As always, they come laid flat for FDM and fully pre-supported for Resin printing!