About this 3D model

Filament painted print made using HueForge - Filament swaps ONLY, no mmu/ams required 4 Color HueForge model. Stormtrooper filament painting made using Sunlu PLA+ colours. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu PLA+ Black Transmission Distance: 0.6 PLA Sunlu PLA+ Grey Transmission Distance: 2 PLA Sunlu PLA+ Silver Transmission Distance: 2 PLA Sunlu PLA+ White Transmission Distance: 8 Swap Instructions: Black until layer #6 at 0.56mm Grey until layer #8 at 0.72mm Silver until layer #9 at 0.8mm White for the rest. This is a filament blending model, avoid special filaments and stick with the plain ones for the best results. SUNLU filaments tend to be more transmissive and are a good choice. Use the exact numbers in your slicer to match up properly. model can be resized but keep the ‘Z’ height the same, designed to print with 0.4 nozzle