About this 3D model

Filament painted print made using HueForge - Filament swaps ONLY, no mmu/ams required 4 colour HueForge model. ‘Millennium Falcon’ filament painting made using Sunlu pla+ filaments Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu PLA+ Black Transmission Distance: 0.6 PLA Sunlu PLA+ Grey Transmission Distance: 2 PLA Sunlu PLA+ Skin Transmission Distance: 6 PLA Sunlu PLA+ White Transmission Distance: 6 Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Grey At layer #8 (0.72mm) swap to Skin At layer #12 (1.04mm) swap to White for the rest. This is a filament blending model, I would recommend trying to match the td as close as possible if not using the exact filaments to get the best results Use the exact numbers in your slicer to match up properly. model can be resized but keep the ‘Z’ height the same, designed to print with 0.4 nozzle