About this 3D model

An ultra slim monitor led light bar. It uses 3mm cob ledstrips and a touch sensor to control the brightness. Additional parts used: DC12v 24V 6A Dimmable Sensor Switch (I got the big spring version) https://nl.aliexpress.com/item/1005003077003427.html 40cm of 3mm cob led strip (cut into two 20cm lengths) https://nl.aliexpress.com/item/1005004909612656.html DC 5.5mm connector https://nl.aliexpress.com/item/1005003324016159.html 4 M3.5x16 tapped screws Some wire to connect everything Note; no affiliate links here, just what I bought. How to print: Please check the photos for the one with the buildplate. You can see only “lightbar-part1.stl” needs a bit of support. The rest is designed to be printed support-free. I also did not need a brim, but you could put it on for safety since the parts are pretty narrow and the ends of the lightbar-parts could potentially lift from the bed. Rest of the print-settings in 1.75 PLA with 0.4 nozzle: layer height 0.2mm walls 2 top shell layers 2 bottom shell layers 2 infill 15% grid