About this 3D model
M10 Snowblower by DBM 10-Inch Wide DesignOur goal is to create a snowblower that is highly efficient, reliable, and affordable. We welcome all comments and suggestions to help improve the product! The blower is compatible with SCX10 V2 and TRX4 mounts. Updates October 21, 2023 Added a press-fit adapter for servos without interchangeable adapters.Updated the Tambour V3 for improved bearing fit, including adjustments for the left side.Added bolt clearance on both sides to secure the auger.Introduced a 5mm-to-3.175mm motor shaft adapter.September 9, 2023 Added SCX10 V2 mount.Enabled belt-driven operation.Made minor tolerance adjustments to accommodate a wider range of 3D printers. Drive Options Direct Drive: Use a motor with a low KV rating (1,000 KV or less).Belt Drive: Compatible with motors up to 3670 size and 2,500 KV (when using a 16T belt pinion).Chute Control Options Micro Servo: Choose a servo with 270° rotation (no need for 360° modification, but it's optional).Manual Rod: A cost-effective, simpler option. Required ComponentsMotor (Low KV Rating)Example: 480B BL Outrunner Motor, 960KV, Reverse ShaftESC (30A Minimum)Example: 30A 3S-4S Telemetry ESCHex Kit for 5mm Shaft (Direct Drive Motors)Example: Prop Adapter and Spinner Set270° Servo MotorExample: 20KG Digital ServoSpring Pins or Modified Bolts 3x Spring Pin (3/16" x 9/16") or 3x M5 bolts with heads removed.Example: Spring PinsOptional Components 32P Pinion Gear, 12TGT2 Pinion (16T or 20T recommended)GT2 Belt, 200mmBearings 6x Bearings (5x11x4)1x Bearing (17x26x5)4x Bearings (12x18x4)1x Optional Bearing (20x27x4) for belt-drive systemsSteel Rods 5/32" x 9 13/16" (Brass or stainless steel recommended)3/16" x 2 7/8" (Brass or stainless steel recommended)Assorted ScrewsExample: M3 Assorted Screw Kit Printing InstructionsMoving Parts: 80% infillWall thickness: 1.2mm to 1.6mmBody Parts: 20% infillWall thickness: 1.2mmSpecial Instructions: Parts with _sp in the name require supports.Parts with _flex can be printed in flexible material (or rigid plastic if necessary).