About this 3D model

M13 Snowblower by DBM 13-Inch Wide DesignOur goal is to create a snowblower that is highly efficient, reliable, and affordable. We welcome all comments and suggestions to help improve the product! The blower comes with a Kyosho Blizzard mount (Beta version). Updates March 20, 2024 Improved fitment for the top link (top transfer case) to provide more clearance for the belt drive system.Added a lever to enhance servo strength, enabling easier lifting of the blower add-on using the Kyosho arm system (no need to disassemble the RC vehicle). January 5, 2024 Note: The attachment for the blower to the Kyosho Blizzard is untested. Please report any issues so they can be addressed. Drive Options Direct Drive: Use a motor with a low KV rating (1,000 KV or less).Belt Drive: Compatible with motors up to 3670 size and 2,500 KV (when using a 16T belt pinion).Chute Control Options Micro Servo: Choose a servo with 270° rotation (no need for 360° modification, but it's optional).Manual Rod: A simpler, cost-effective option. Required ComponentsMotor (Low KV Rating)Example: 480B BL Outrunner Motor, 960KV, Reverse ShaftESC (30A Minimum)Example: 30A 3S-4S Telemetry ESCHex Kit for 5mm Shaft (Direct Drive Motors)Example: Prop Adapter and Spinner Set270° Servo MotorExample: 20KG Digital ServoSpring Pins or Modified Bolts 3x Spring Pin (3/16" x 9/16") or 3x M5 bolts with heads removed.Example: Spring PinsOptional Components 32P Pinion Gear, 12TGT2 Pinion (16T or 20T recommended)GT2 Belt, 200mmBearings 6x Bearings (5x11x4)1x Bearing (17x26x5)4x Bearings (12x18x4)1x Optional Bearing (20x27x4) for belt-drive systemsSteel Rods 5/32" x 9 13/16" (Brass or stainless steel recommended)Assorted ScrewsExample: M3 Assorted Screw Kit Printing InstructionsMoving Parts: 80% infillWall thickness: 1.2mm to 1.6mmBody Parts: 20% infillWall thickness: 1.2mmSpecial Instructions: Parts with _sp in the name require supports.Parts with _flex can be printed in flexible material (or rigid plastic if necessary).