About this 3D model

Mounting for a piece of 2020 extrusion to use as cable management. Mounts to the top of the effector for the AnyCubic Kossel. The mounting bolts will need to be swapped out for longer ones. Instructions originally use M3x8, will need M3x10 to accommodate the additional material. Designed to be used with my 13mm ID cable clips. https://www.thingiverse.com/thing:2390968 Print Settings Printer: AnyCubic Kossel Linear Plus Resolution: 0.2mm Infill: 25% Category: 3D Printer Accessories