About this 3D model

⚠️ Note: This version is obsolete. Please download the significantly improved V2 from this page . The new version includes mounting bases for turret cameras with 127.3 mm and 138.3 mm diameters and features significantly improved threads in the side openings (grommet ports) as well as on the grommets themselves. The grommets have also been further refined and optimized. ⚠️ If you are looking for inclined 127.3 mm bases designed to level the camera when mounted under a roof, please download them from this old page. Different bases for older Hikvision turrets (DS-2CD2332-I, DS-2CD2335FWD-I, DS-2CD2342FWD-I etc) with diameter 127mm. One type comes with grommet, and you can choose, if you pull the cable first and then crimp RJ45 connector, or you choose a split type, where you can use finished cable. Type with leveling marks you can use with spirit level. But I don't know already, why I did it, as you can rotate the turrets freely. :-) Wall templates are used mainly for inclined variants. Radius 42,5mm is from center of template to center of the holes for screws. EDIT 2025-04-06: Based on a request from one of the users, I created and uploaded a version with two grommets: the first, where the grommets are at an angle of 90 degrees, and the second - continuous, where the grommets are at an angle of 180 degrees.