About this 3D model

Faux blueprint of an alien head for the extra terrestrial fans out there :) 3MF file will have all settings preloaded for Bambu Studio/Bambu printers. If you don't use those, then download the STL file, and use the instructions below: Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA CC3D Blue Gray Transmission Distance: 3 PLA Sunlu Beige Transmission Distance: 8.2 PLA Kingroon White Transmission Distance: 8 Swap Instructions: Start with Charcoal At layer #18 (0.88mm) swap to Blue Gray At layer #23 (1.08mm) swap to Beige At layer #32 (1.44mm) swap to White for the rest. _________________________________ If you'd like to support me, I now have a Patreon ! Joining will give you behind the scenes information on WIPs, access to a private discord, early access AND exclusive models! If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon! _________________________________