About this 3D model

UPDATE 25/3/2023 thickened bracket as noticed it heat creeps over time. this reduces the amount tap can move but should still trigger. print standing on its end. Uses 4x m3 heatsets 2x m3x10 Attach probe to bracket with included small screws Attach the bracket to tap carriage with 2 m3x10 screws in the bottom by replacing the existing 2x m3x6 screws from tap probe y offset = 65 probe x offset = 0 note may have to add something to physical end stops if beacon interferes with homing hitting on rear motor. hall effect end stops work without adjustment Used tap cad files and beacon cad file to help with design found here Tap https://github.com/VoronDesign/Voron-Tap Beacon https://github.com/beacon3d/docs/blob/master/mcad/beacon/Beacon_RevD_Assm_Normal.STEP