About this 3D model

The Scream Untill now i did add 2-3 color pictures but decided to go further and do something more challenging. So here we are, 2 ams version picture for 6 colors (with print plate for 1 AMS too, don't worry). Boost Me Hi, if you appreciate my work, just boost me. If you have private call and want some private hueforge pm me! Remember if you sant to scale, do it only with x and y axis, z must be the same as original. Due to many requests for commercial licenses for my 3D models I created a patreon page. You can become a member to get permission for commercial use or just want to support my work: patreon.com/Bunkw420 If you Just want to give a one time Support you can buy me a coffe here. You can also request privare hueforge ;) https://buymeacoffee.com/bunkw420h The Scream is a composition created by Norwegian artist Edvard Munch in 1893. The Norwegian name of the piece is Skrik (Scream), and the German title under which it was first exhibited is Der Schrei der Natur (The Scream of Nature). The agonized face in the painting has become one of the most iconic images of art, seen as symbolizing the anxiety of the human condition . Munch's work, including The Scream , had a formative influence on the Expressionist movement. According to Wikipedia. This version is slightly different from original to better fit color, hope you enjoy For 1 AMS i added a pause (at 14 layer) just before the end of the 4th color which is orange to allow for slots 1 and 2 to be changed from Black and Green to Yellow and White- in this exact order! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA Sunlu Green Transmission Distance: 6 PLA Protopasta Cobalt Blue Transmission Distance: 5 PLA PolyLite Pro Orange Transmission Distance: 7.5 PLA PolyLite Lemon Yellow Transmission Distance: 6.5 PLA Default White Transmission Distance: 5 Swap Instructions: Start with Charcoal At layer #4 (0.4mm) swap to Green At layer #6 (0.56mm) swap to Cobalt Blue At layer #10 (0.88mm) swap to Orange At layer #15 (1.28mm) swap to Lemon Yellow At layer #18 (1.52mm) swap to White for the rest.