About this 3D model

I made a Tikki in Hueforge, this is a Kwarmi from The Miraculous Ladybug series. Have fun with it! If you are missing a shelf to put the picture or the other Hueforge pictures on the wall, take a look at my HueShelf ;) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Black Transmission Distance: 0.3 PLA Gray Transmission Distance: 2.5 PLA Yellow Transmission Distance: 6 Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Gray At layer #28 (2.32mm) swap to Yellow for the rest.