About this 3D model

~ You might also want to consider my Universal Spool Hub Adapter . ~ I use filaments from many different manufacturers, and was disappointed when they all used different spool sizes/widths. I have a Flashforge Dreamer and am using @BaronWilliams' OmniStands with relish, and so decided to come up with an OpenSCAD-designed spool adapter that lets you set the adapter dimensions so you can make a compatible hub. The modifiable parameters include: Height (length) of the adapter Outer diameter (width) of the adapter Inner diameter (width) of the axle Number of spokesBaronWilliams' OmniStands: Top Mount: http://www.thingiverse.com/thing:704631 Internal Side Mount: http://www.thingiverse.com/thing:652415 The OpenSCAD design makes use of the Arc module created by T3P3 and available under GPLv3 license: http://www.youmagine.com/designs/4765 Print Settings Printer Brand: FlashForge Printer: FlashForge Creator Pro Rafts: No Supports: No Resolution: 0.2 Notes: Suggested dimensions for 1 kg spools (but you may need to adjust depending on your printer's characteristics, print material, temperature, warping, etc): HATCHBOX Height = 70 Radius = 27 MAKER GEEKS Height = 64 Radius = 25 ATOMIC FILAMENT Height = 70 Radius = 25 Happy to add more values if anyone has experience/suggestions! Category: 3D Printer Accessories