About this 3D model

It is recommended to use a smooth high temperature printing plate without using adhesive or hairspray. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Matte Charcoal Transmission Distance: 0.6 PLA Matte Ash Gray Transmission Distance: 1.5 PLA Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Ash Gray At layer #16 (1.36mm) swap to Ivory White for the rest.