About this 3D model

A housing for the Waveshare 7.5 inch display. A battery, the ESP32 and the charging electronics can be accommodated in the housing. Necessary parts: ESP32 Mikrochip Waveshare Waveshare 7.5 E-Ink Display Chargeelectronics (TP4056) Battery (3.7V) Jumpercabel (Not absolutely necessary, can simply be soldered instead) Batterycabel (Not absolutely necessary, can simply be soldered instead) Screws (2x10mm) Necessary tools: Soldering iron 3D printer to print the housing. You can of course also build your own housing from wood/cardboard etc. Assembly: The display is attached to the front using double-sided adhesive tape. The ESP32 and the battery can be inserted into the housing. Unfortunately, the charging electronics are also glued as they have no cut-outs for screws. I simply used hot glue. Take care not to drill into the cables with the screws when screwing them together. More details: https://spacepc.de/wetter-display-mit-esp32-und-3d-druck-gehaeuse/ Software: https://github.com/G6EJD/ESP32-e-Paper-Weather-Display Print settings: 0.2mm(standard), gyroid infill, tree support.