About this 3D model

I call this “Dragon of the Sea” created with Hueforge. I used Sunlu Shiny Silk Grey and Bronze (Looks gold) but silver and gold can be used. I included layer heights if you want to experiment with other colors. I recommend changing the Orange if you do. Also included is a print profile for if you do not own an AMS, I added pauses to the appropriate layer heights for filament change. Let me know if you find any issues. Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA Shiny Silk Sunlu Grey Transmission Distance: ? PLA+ Sunlu Sunny Orange Transmission Distance: ? -[Change this for your own accent color, or leave orange for original]- PLA Shiny Silk Sunlu Grey Transmission Distance: ? PLA Default White Transmission Distance: 5 PLA Shiny Silk Sunlu Bronze Transmission Distance: ? PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #8 (0.8mm) swap to Grey At layer #11 (1.04mm) swap to Orange At layer #15 (1.36mm) swap to Grey At layer #16 (1.44mm) swap to White At layer #19 (1.68mm) swap to Gold At layer #24 (2.08mm) swap to White for the rest. To use 5 filaments with 1 AMS: Load up your AMS with your First 4 Colors of filament, having your 5th on standby. Select the AMS slot containing black for the 5th color. When Black layers are done printing, switch out the Black filament for 5th color.