About this 3D model
Summary Underberg logo lamp This is yet another LED logo lamp with the Underberg logo, similar to my other lamps. If you want to recreate this you'll need the following things: -transparent filament for Underberg logo -black (or colour you want) filament for the lamp case -on/off snap in switch https://www.amazon.com/TWTADE-Position-（Quality-Assurance-Years）XW-604BB1/dp/B07HHVTM7V/ref=sr_1_18?keywords=SPST+2&qid=1579096753&sr=8-18 -Female DC Power Jack Panel Mount with Hex Nut https://www.amazon.com/TOTOT-5-5mm-Female-Socket-Electrical/dp/B077YB75N3/ref=sr_1_16?keywords=DC%2B2%2C1%2Bx%2B5%2C5mm&qid=1579096500&sr=8-16&th=1 -30cm LED Stripe 24VDC -AC/DC Adapter, 24VDC/1A 1.Print the Case, back cover and the inlays for the letters 2.Print the logo 3.Glue the Inlays in the Letters 4.Add LED stripes, DC Power Jack and the switch, connect the wires I also added a clean back cover without cutouts. Please let me know in the comments if you would like to see other design with other brands/logos. ## ## ## This is another LED logo lamp with the Underberg logo, similar to my other lamps. If you want to recreate this you'll need the following things: -transparent filament for the Underberg logo -black (or color you want) filament for the lamp case -snap-in toggle switch https://www.amazon.de/gp/product/B00WJLF8OQ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 -DC 2,1 x 5,5mm panel-mount female jack https://www.amazon.de/gp/product/B00FWP5EYK/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 -30cm LED strip 24VDC -AC / DC adapter, 24VDC / 1A https://www.amazon.de/JRing-Stecker-Netzteil-Radiowecker-LED-Strip-Lichtleisten-schwarz/dp/B07HQL9JM8/ref=sr_1_fkmr0_1?__mk_de_DE=ÅMÅŽÕÑ&keywords=JRing+Netzteil+24V+DC+1A%2C+EU-Plug+5%2C5%2F2%2C1mm%2C+24W+Stecker-Netzteil+für+Radiowecker%2C+LED-Strip+Streifen%2C+Speedport%2C+Lichtleisten%2C+USB-Hub%2C+Switch%2C+Rout&qid=1579100558&sr=8-1-fkmr0 1.Print the case, back cover and the inlays for the letters 2.Print the logo 3.Glue the inlays in the letters 4.Install the LED strips, DC jack and the switch, connect the wires I also added a clean back cover without cutouts. If you would like to see other designs with other brands, please leave your wishes in the comments. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 15 Filament: Prusament, Amazon PLA Galaxy Black, Transparent Notes: Use Supports for printing the back cover with cutouts