About this 3D model
Summary XBOX logo lamp This is yet another LED logo lamp with the XBOX logo, similar to my other lamps. If you want to recreate this you'll need the following things: -transparent filament for XBOX logo -black (or colour you want) filament for the lamp case -on/off snap in switch https://www.amazon.com/TWTADE-Position-（Quality-Assurance-Years）XW-604BB1/dp/B07HHVTM7V/ref=sr_1_18?keywords=SPST+2&qid=1579096753&sr=8-18 -Female DC Power Jack Panel Mount with Hex Nut https://www.amazon.com/TOTOT-5-5mm-Female-Socket-Electrical/dp/B077YB75N3/ref=sr_1_16?keywords=DC%2B2%2C1%2Bx%2B5%2C5mm&qid=1579096500&sr=8-16&th=1 -30cm LED Stripe 24VDC -AC/DC Adapter, 24VDC/1A 1.Print the Case, back cover and the inlays for the letter "B" and "O" 2.Print the logo 3.Glue the 3 saved Parts in the Letter "B" and the Letter "O" from the logo 4.Add LED stripes, DC Power Jack and the switch, connect the wires I also added a clean back cover without cutouts. Please let me know in the comments if you would like to see other design with other brands/logos. ## ## ## This is another LED logo lamp with the XBOX logo, similar to my other lamps. If you want to recreate this, you'll need the following things: -transparent filament for the XBOX logo -black (or color of your choice) filament for the lamp housing -in-line rocker switch https://www.amazon.de/gp/product/B00WJLF8OQ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 -DC 2,1 x 5,5mm female panel mount socket https://www.amazon.de/gp/product/B00FWP5EYK/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 -30cm LED strip 24VDC -AC/DC adapter, 24VDC/1A https://www.amazon.de/JRing-Stecker-Netzteil-Radiowecker-LED-Strip-Lichtleisten-schwarz/dp/B07HQL9JM8/ref=sr_1_fkmr0_1?__mk_de_DE=ÅMÅŽÕÑ&keywords=JRing+Netzteil+24V+DC+1A%2C+EU-Plug+5%2C5%2F2%2C1mm%2C+24W+Stecker-Netzteil+für+Radiowecker%2C+LED-Strip+Streifen%2C+Speedport%2C+Lichtleisten%2C+USB-Hub%2C+Switch%2C+Rout&qid=1579100558&sr=8-1-fkmr0 1.Print the case, back cover and the inlays for the letters "B" and "O" 2.Print the logo 3.Glue the 3 saved parts in the letters "B" and "O" of the logo 4.Install LED strip, DC socket and switch, connect/wire the cables I also added a clean back cover without cutouts. If you would like to see other designs with other brands, please leave your wishes in the comments Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 15 Filament: Prusament, Amazon PLA Galaxy Black, Transparent Notes: Use Supports for printing the back cover with cutouts