About this 3D model
Summary FORTNITE logo lamp This is yet another LED logo lamp with the FORTNITE logo, similar to my NETFLIX lamp . If you want to recreate this you'll need the following things: -yellow + transparent filament for FORTNITE logo -black (or colour you want) filament for the lamp case -on/off snap in switch https://www.amazon.com/TWTADE-Position-（Quality-Assurance-Years）XW-604BB1/dp/B07HHVTM7V/ref=sr_1_18?keywords=SPST+2&qid=1579096753&sr=8-18 -Female DC Power Jack Panel Mount with Hex Nut https://www.amazon.com/TOTOT-5-5mm-Female-Socket-Electrical/dp/B077YB75N3/ref=sr_1_16?keywords=DC%2B2%2C1%2Bx%2B5%2C5mm&qid=1579096500&sr=8-16&th=1 -30cm LED Stripe 24VDC -AC/DC Adapter, 24VDC/1A 1.Print the Case and the back cover, save the 2 Parts of the Letter "O" and the Letter "R" 2.Print the logo and add a colour change for the last 5 layers 3.Glue the 2 saved Parts in the Letter "O" and the Letter "R" from the logo 4.Add LED stripes, DC Power Jack and the switch, connect the wires Please let me know in the comments if you would like to see other design with other brands/logos. # # # This is another LED logo lamp with the FORTNITE logo, similar to my NETFLIX lamp . If you want to recreate this, you will need the following things: -yellow + transparent filament for the FORTNITE logo -black (or colour you want) filament for the lamp housing -Built-in rocker switch https://www.amazon.de/gp/product/B00WJLF8OQ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 -DC 2.1 x 5.5mm female socket flush mounting socket https://www.amazon.de/gp/product/B00FWP5EYK/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 -30cm LED strip 24VDC -AC / DC adapter, 24VDC / 1A https://www.amazon.de/JRing-Stecker-Netzteil-Radiowecker-LED-Strip-Lichtleisten-schwarz/dp/B07HQL9JM8/ref=sr_1_fkmr0_1?__mk_de_DE=ÅMÅŽÕÑ&keywords=JRing+Netzteil+24V+DC+1A%2C+EU-Plug+5%2C5%2F2%2C1mm%2C+24W+Stecker-Netzteil+für+Radiowecker%2C+LED-Strip+Streifen%2C+Speedport%2C+Lichtleisten%2C+USB-Hub%2C+Switch%2C+Rout&qid=1579100558&sr=8-1-fkmr0 1.Print the housing and the back cover, save the 2 parts of the letter "O" and "R" 2.Print the logo and add a colour change for the last 5 layers 3.Glue the 2 saved parts in the letter "O" and "R" of the logo 4.Install LED strips, DC socket and switch, connect/wire the cables If you would like to see other designs with other brands, please leave your wishes in the comments. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15% Filament: Verbatim, Redline, Sunlu PETG + PLA black, yellow, transparent