About this 3D model

I have uploaded a 2nd (and 3rd) print profile, as this was my first Hueforge, and I've learned a few things since I started. The new version has a variable layer height which will enable it to be printed faster for the base layers (which do not contain any details). The rest of my NHL Hueforges can be found here: https://makerworld.com/@CanadianGamer/collections/549654 ----------------------------------- The pictured Frame is a friction Fit design here for 200x200 Hueforges https://makerworld.com/en/models/381229#profileId-281475 I've released a desktop stand you can find here: https://makerworld.com/en/models/1083539#profileId-1075894 If you resize the model, do NOT scale the Z-axis or the colours will not be in the right spots. Update - 2025 - Version 3 - Colour Variation This print profile uses Black / Blue / Orange and Ivory White to give a sharper definition to the print. Printing Instructions - Version 2 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Bambu Matte Marine Blue PLA Bambu Matte Dark Blue PLA Bambu Basic Orange PLA Bambu Matte White Swap Instructions: Start with Marine Blue At 0.72mm swap to Dark Blue At 1.28mm swap to Orange At 2.16mm swap to White for the rest. Printing Instructions Version 1 - Old Version - Longer Print Time Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Bambu Matte Marine Blue PLA Bambu Dark Blue PLA Bambu Basic Orange PLA Bambu Matte Ivory White Swap Instructions: Start with Marine Blue At layer #10 (0.88mm) swap to Dark Blue At layer #17 (1.44mm) swap to Orange At layer #31 (2.56mm) swap to White for the rest.