About this 3D model

Hi Everyone! We hope you enjot this Hueforge project of ours! White Cat. This and ALL of our other creations, OVER 30 SO FAR, are available on our Patreon for COMMERCIAL USE through subscription. patreon.com/DENUSA We are including Two Versions, the finished and colored 3mf file ( A1 Selected, just change to desired printer). The Second version is just the STL, the information will be below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 240x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 2 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Jade White for the rest.