About this 3D model

Hey, We Hope You Enjoy Ou Newest Addition, You Only See 10% Here On Makerworld, So Head Over And Check Out Our Patreon Community! patreon.com/DENUSA We are including Two Versions, the finished and colored 3mf file ( A1 Selected, just change to desired printer). Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 192x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 192x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Overture Purple Transmission Distance: 1 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Purple At layer #13 (1.12mm) swap to Pink At layer #19 (1.6mm) swap to BambuLab Green At layer #21 (1.76mm) swap to Jade White for the rest.HUEFORGEwall 2dwall 2d artwallbambutrippypicturesartart 2024art 2dart 2d 2024art 3d